UPVC Window Handle Replacement

It’s easy to repair a damaged window handle with the right tools. However, it is essential to know your type of handle and the spindle’s length prior buying the replacement handles for windows.

Older uPVC window handles have a spur which protrudes and locks over the wedge striker. These can be right-handed or left-handed and should be compatible when replaced.

What type of lock and handle do I have?

There are many window locks and handles made from upvc, each with its distinct advantages and functions. The type of handle you are using will determine how easy it is to open your windows and whether or not the locking mechanism works according to the plan. As time passes, and with regular use the upvc handles that are on your windows could be damaged and worn out. This makes them less secure and effective. In some cases they might even be completely removed. It is crucial to fix your window handles made of upvc immediately if you notice them falling off. This will help prevent potential break-ins and ensure your home is secure.

It’s a task that virtually anyone can perform. You will need some basic tools, but with the proper knowledge, it’s an easy task that will only take a couple of minutes. You must know the kind of lock or handle you have on your window. This will help you choose the appropriate replacement.

Inline Espagnolette Handles

They are typically found on the side of the window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the center of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles have one screw that is used to secure the handle to the frame and aren’t as secure as other kinds of window handles.

Handles that tilt and turn

In contrast to other handles made of upvc that are tilt and turn, these handles can both be rotated to open the window, and turned inwards to allow to allow ventilation. In general, they have a 7mm spindle at the side of the handle. They are available in both left and right-handed versions.

It is crucial to determine the size of the spindle when purchasing a new upvc handles. Not all are the exact same size. To determine the length of your upvc handle simply drop something in the middle of the hole and then measure how far down it goes before it comes into contact with an obstruction. This is the maximum spindle length that will fit your window.

What is a spindle?

uPVC window handles work in a similar way like doors. By turning the handle, you can activate a latch inside the frame. This opens the window so that it can be opened and closed. However, in some cases, the handles may become damaged, particularly when they are frequently used or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they’re not functioning correctly.

There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit in the uPVC frames in various ways and each handle type has a particular spindle that is used to lock the mechanism fitted into the window. This is why it is crucial to identify the type of handle you have installed on your uPVC window so you can find the right replacement for it.

You can find out what kind of uPVC handle you are using by looking at the base section of the handle. There should be a’snap in cover over one screw which holds the handle base in the correct position. Remove this and then you should be able see the second screw on the opposite side of the base of the handle. After both screws have been removed, you should be able pull the handle from the uPVC.

After you have removed the uPVC window handle, you have to carefully unscrew the spindle that was previously attached to the locking mechanism. Take careful note of the length of the spindle as you’ll need to make sure that you buy a replacement that has the same length as the original handle and locking mechanism.

The main issue with most window handles made of uPVC is that the spindle gets worn-out and is unable to longer work with the locking mechanism. This can be caused by corrosion, damage from frequent use, or a loosening locking mechanism. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off my old handle?

Over time and through everyday use, window handles can be damaged or destroyed, and when this happens, it is essential to fix them as quickly as possible to ensure the security of your home. It is simple to replace a damaged or worn handle. The task can be completed in under a minute without the need for any special tools.

To take off the handle, first remove the screw located at the bottom of the handle. Once the screw has been removed, the handle can be removed. There will be another screw located at the bottom of the handle’s base, and this can be removed too. Once the two screws are removed, the handle will be removed from the window’s base.

After the handle has been removed, grab the new handle and align the fixing holes with the holes currently in the window frame. There may be a tiny sticker or caps on the new handle, so take them off the caps if needed, and then put the handle in place. It is important to check whether the handle functions after it is put in place. Turn the handle around and make sure that the lock mechanism is in place.

Espag handles come with spindles that extend out of the handle and slots into the multipoint locking mechanism of the frame of the window. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom bar crossmember.

After you have put in the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. When the handle is ready for use, open and close the window a few times to make sure that it functions properly and securely.

How do I install the new handle?

It’s not difficult to alter the handle on your Upvc windows. The procedure is simple. You’ll need a screwdriver, and a little bit of patience. The first step is to ensure that the handle you have previously used is not locked and then remove any screws that are visible. you can also replace them by screw caps if you need. After removing the handle and you are ready to take an outline of the length of the spindle that extends from the back of the handle. This is important as it will determine the type of handle that you will need to purchase.

Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They have a spindle that runs through the handle and acts as a locking mechanism within the window frame. When the handle is turned, it releases the latch on the window and allows it to open. With time and regular use, espagnolette handles may be damaged or damaged which is why it is essential to find a replacement.

Cadenza handles are a form of uPVC handle that is typically used with tilt and turn windows. They feature a protruding knife that is operated by a multi-point locking mechanism within the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. They can be replaced using the same procedure as you would for espagnolette handles however, ensure that the new handle is not angled and flat.

After you have chosen the correct handle, simply align the new handle to existing screw holes prior to screwing it into place. Then, you should put the screws on and test your new handle. You can do this by dragging the handle between the locked position to the unlocked for window handle Replacement a few times. It is possible to contact an expert to determine whether you can solve any problems. They can provide advice on how to resolve the issue in a quick and effective way.